All Speed, All Spirit

0.1mm Thickness Testing Pioneer, The next-level high-speed printing experience and a gateway 3D printer to an era of ultra-high-speed printing.

Breaking down the resin limitations, experience high-speed printing under the testing condition at 0.1mm thickness. High-Speed Resin 2.0: 0.1mm layer height print time, 170mm/h.

The All-New 14K Optical Sources System LighTurbo 3.0

Make each beam of light precise & uniform.

Equipped with a light-off compensation algorithm, it can dynamically adjust the light-off time of the under-screen light source according to the exposure area of the printing model and the resin flow rate, ensuring that each layer of the model is successfully exposed and detached, improving the printing success rate.

Photon Mono M7 Pro has a build volume of 223*126*230mm, providing ample space for your creativity.

Automatic precise leveling and zeroing of the device, eliminating the need for manual leveling operations.

During the printing process, if the model experiences issues such as layer fractures, bottom detachment, or detachment, printing automatically stops and a pop-up alert is issued, allowing users to adjust the printing task promptly, avoiding wasted resin and time.

Automatically monitor the number of times the release film is peeled off. Upon reaching 45,000 times, users are reminded to replace it promptly to avoid subsequent printing failures due to decreased release film performance.

Detect solid residues inside the resin vat and promptly alert the user with a pop-up window to avoid damage to the screen due to manual inspection oversights.

When the resin level in the vat is below the amount required for slicing printing, users are reminded to refill it promptly.

Quickly assess the platform’s installation status. In case of abnormalities, a pop-up reminder prompts timely adjustments.

Automatically check the status of the temperature-controlled resin vat, release film, and material loading and unloading modules, the three core modules.

● Built-in activated carbon filter and high-performance ventilation motor.

● VOC content purification efficiency reaches up to 99% in a single operation*.

● Effectively absorbs and filters resin odors near the printing source, providing a cleaner and more reassuring user experience.

*The testing data is from Anycubic Lab, for reference only.

● 1.What is the hottest temperature that the heater can heat the resin to? Is the temperature control adjustable?It is adjustable.The default temperature is 25 centigrade, and can be set at 20-40 centigrade.

2.Can the auto fill unit be used while the cover is on?Yes it can be used while the cover is on.

3.Do i need to buy high speed resin for the fast prints? Or this can print fast with the normal resin?Photon Mono M7 Pro can support both High Speed Resin and Standard Resins. The print speed is different. Max Speed 130mm/hr, 0.1mm Layer With Standand Resin; Max Speed170mm/hr, 0.1mm Layer With High Speed Resin.

4.What hardware is required when using a printer to clean and cure printed parts?To clean and cure printed parts using a printer, you will need Cleaning Kit and Wash & Cure 3 Plus.

5.How about finding out what resins this machine can support and where to find the resin settings for this 3D printer?For information on resin settings, please visit: Resin Settings for Anycubic 3D Printers..